Lithonia Lighting® Recessed Lighting Housing, Series: L5, 120 VAC, 5-1/2 in Ceiling Opening, Incandescent Lamp, 1 Lamps, Non-IC Insulation, Ceiling Mount, For Use With: L Series Baffle Wide Flange LED Module/P Series Open and Baffle Wide Flange LED Modules/LED Gimbal Modules, 5 in Dia, 7-1/2 in Height, 12-3/8 in Width, Aluminum Housing, Nickel
Color |
: |
Nickel |
Depth |
: |
13-1/2 in |
Diameter |
: |
5 in |
Height |
: |
7-1/2 in |
Mounting Type |
: |
Ceiling |
Number of Lamps |
: |
1 |
Series |
: |
L5 |
Suitable For Use With |
: |
L Series Baffle Wide Flange LED Module/P Series Open and Baffle Wide Flange LED Modules/LED Gimbal Modules |
Width |
: |
12-3/8 in |
Lamp Type |
: |
Incandescent |
Insulation Type |
: |
Non-IC |
Voltage Rating |
: |
120 VAC |
Ceiling Opening |
: |
5-1/2 in |
Housing Material |
: |
Aluminum |
- Recessed housing rated IC for new construction only
- Approved for direct burial in insulation and all ceiling and wiring types
- Airtight, galvanized steel pan with aluminum can and junction box (4) built-in Romex® clamps and ground wire
- Rated for 90 deg C
- Galvanized bar hangers span up to 24 in o.c. and feature stepped shank nail and positioning guide with integral T-bar locks
- Two locking screws hold fixture position
- Galvanized steel junction box (4) built-in Romex® clamps
- Five 1/2 in and (2) 3/4 in knockouts with slots for pryout
- Rated for through branch wiring
- Maximum 4 (2 in, 2 out) 12 AWG conductors
- Removable J-box doors for easy access, ceiling/recessed mounting
- Durable medium base porcelain socket with nickel plated copper alloy screw shell and contact
- Socket clips to trim to ensure proper and consistent lamp position
- Socket attaches to reflector to ensure proper and consistent lamp position
- Thermal protection provided against improper lamp usage
- Airtight housing suitable for airtight installations
- 2 x 8 wood joist or T-bar installation
- Expandable bar hangers allow for off-center mounting in wood joist or T-bar ceilings, length of 25-1/4 in maximum 13-1/4 in minimum or cut to fit 9 in on center joist construction
- Vertical adjustment of housing allows for flush mounting with ceiling face
- Suitable for ceilings up to 1-1/2 in thick
-
Specification Sheet
https://www.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Lithonia_Lighting_L5B_Datasheet.pdf