printPrint
  1. pin-int

NorthStar™ RIMSS2

RIMSS2 Signal Splitter, For Use With Encoder, PVC Coated

  • MPN: RIMSS2
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading loading
NorthStar™ RIMSS2

NorthStar™ Signal Splitter, For Use With: Encoder, PVC Coated, 5.03 in H x 3.1 in W x 1.9 in D

Dimensions      :      5.03 in H x 3.1 in W x 1.9 in D
Material      :      PVC Coated
Suitable For Use With      :      Encoder
  • Encoder signal splitter eliminates the expense and maintenance of two separate encoders
  • Optically isolated outputs can be sent to a motor drive and a display at the same time
  • Combats long distance and electrical noise and interference problems
  • Encoder splitter board mounts to standard DIN rail EN50022
  • Input signal - two or three channel quadrature signal, square wave, open collector, differential, or single ended line driver
  • Output signal - two independent, isolated line driver output sets
  • Output protection - ESD to MIL-STD-883 and short-circuit protected
  • 4 to 26 VDC input voltage
  • 2.2 mA minimum, 3.5 mA typical input signal current
  • Optically isolated, 1 kOhm at 4 V, 6.8 kOhm at 24 V typical
  • 0 to 120 kHz frequency range
  • 5 to 26 VDC supply voltage
  • 150 mA output current
  • 26 to 16 AWG wire gauge accepted
  • DIN rail EN50022 mounting
  • 0 to 50 deg C operating temperature
  • 98% non-condensing operational humidity