Electrozad

The nCM xx RJB family of nLight ceiling/surface mount occupancy sensors provide a range of networked sensor solutions for applications with finished ceilings (e.g. ceiling tiles, sheetrock, plaster). nCM xx RJB family sensors utilize 100% digital Passive Infrared (PIR) detection and are available with several lens options, providing flexibility for multiple mounting height and coverage pattern requirements. Dual technology occupancy detection can also be added as an option for applications where occupants are stationary for long periods of time. All sensors have integrated on/off photocells as a standard feature, with automatic daylight harvesting/dimming control as an available option. Additionally, nCM xx RJB family sensors are also available with an optional auxiliary low voltage relay for simple integration with a BMS system or other building system.These sensors are powered via the nLight network bus and typically communicate with one or more nLight enabled luminaires (e.g. Lithonia VTLED Series) or nLight relay/dimming packs to enable control of fixtures individually or in groups. These configurations work standalone and do not require a connection to a larger nLight network.

Acuity Brands® nLight® Ceiling Mount Occupancy Sensor, Dual Technology Small Motion, Series: nCM, 12/24 VDC, PIR/Microphonics Sensor, 475 sq-ft Coverage, 360 deg Viewing, 45 s to 25 min Time Delay, RJ45 Connector Connection, On/Off Control Output, Ceiling Mounting, -10 to 85 deg C, Matte White, 4.55 in Dia x 1.55 in D Dimensions

• 100% digital PIR detection
• Integrated photocell standard (disabled by default) photocell views down through sensor lens
• On/Off mode photocell has full on/off control during periods of occupancy
• Inhibit mode photocell can prevent lights from turning on if adequate daylight is available, but cannot turn lights off
• LED status indicator
• Adjustable settings (e.g. occupancy time delays, photocell set-points) via push-button or sensorView software application
• Broadcasts occupancy and photocell information over a local nLight channel
• Remotely upgradeable firmware
• Ceiling tile/sheetrock surface, 3.5 in octagon box, Single-gang handy box mounting
• 3mA power consumption
• 1 A at 24 VAC/VDC relay rating

• Instruction/Installation Manual https://assets.unilogcorp.com/2/ITEM/DOC/Sensor_Switch_NCM_10_RJB_Installation.pdf
• Specification Sheet https://assets.unilogcorp.com/2/ITEM/DOC/Sensor_Switch_NCM_10_RJB_Datasheet.pdf
• Video Link https://youtu.be/QgCuwfLuvkM