Siemens Canada is proud to offer one of the highest quality, broadest and most flexible load center lines in the industry. From single family to multi-family applications, Siemens can offer a high quality, labor saving load center for your application.
Siemens Instawire™ Single Phase Main Lug Load Center, Type EQL Low Voltage, 240 VAC, 125 A, 60 Hz Frequency, 10 kA Interrupt, 24 Circuits, Q Breaker, 3-Wire Wiring Configuration, 125 A Bus, 24/48 Spaces, 4 to 2/0 AWG Wire, Flush Mounting, NEMA 1 Enclosure, Steel Housing Material, 24.1 in H x13 in W x 3.8 in D Dimensions
| Breaker Type |
: |
Q |
| Bus Rating |
: |
125 A |
| Dimensions |
: |
24.1 in H x13 in W x 3.8 in D |
| Enclosure Type |
: |
NEMA 1 |
| Frequency Rating |
: |
60 Hz |
| Housing Material |
: |
Steel |
| Mounting Type |
: |
Flush |
| Number of Circuits |
: |
24 |
| Number of Spaces |
: |
24/48 |
| Series |
: |
EQL |
| Type |
: |
Type EQL Low Voltage |
| Wire Size |
: |
4 to 2/0 AWG |
| Wiring Configuration |
: |
3-Wire |
| Voltage Rating |
: |
240 VAC |
| Amperage Rating |
: |
125 A |
| Interrupt Rating |
: |
10 kA |
- Straight in wiring design helps reduce the need to bend cables and wires
- Combination slot/Robertson neutral and ground screws allows for installation flexibility, enabling simple, one tool installation and speed wiring
- Both aluminum and copper busbars meets any specification and job site requirement
- Extended capacity fully distributed neutrals are easily accessible, reduces installation time and simplifies wiring
- Gasketed slide hinge door with outdoor load center provides easy installation and improved weatherproof protection
- Indoor load centers (type 1) can be mounted for either top or bottom feed meet job site requirements and reducing cable waste
- Suitable for up to 22 kA short circuit current rating provides increased high fault current protection
- Combination flush/surface trim in three colors meets any application need
- Patented Instawire™ neutrals and ground bars allows for faster installation as screws are backed out, ready for wire insertion
- Factory installed ground bars reduces installation time and cost, no need to order additional ground bar kits
- A flexible extruded plastic base pan makes breaker installation and removal quick and easy
- Concentric knockouts makes wiring easy
- Load center enclosures and trims are formed of cold rolled, code gauge steel, all devices are finished with ANSI 61 gray paint (electro deposition painting process)
- White, cold rolled steel
- Aluminum busbar
Print
Specification Sheet