Non Stock
printPrint
  1. pin-int

Conduit RIGID45250

RIGID45250 Rigid Galvanized Steel Elbow 2-1/2" 45 Degree Threaded Trade Size

  • MPN: RIGID45250
  • UPC: 786692001876
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading loading
Conduit RIGID45250

Wheatland controls the manufacture of its hot dip galvanized steel rigid metal conduit (RMC), electrical Metallic tubing (EMT) and Intermediate metal conduit (IMC) every step of the way. we fabricate our own tubing from flat steel coils, weld it and do our own galvanizing. Then to be sure you get the same quality throughout the raceway system, we make our own nipples, elbows and couplings to match. in fact, we're the only conduit manufacturer who does.


Wheatland Conduit Elbow, Standard Radius, 2-1/2 in, 45 deg, 10-1/2 in Radius, For Use With: Rigid Conduit, Steel, Silver/Gray, Hot Dipped Galvanized, 2.489 in ID x 2.875 in OD

Color      :      Silver/Gray
Dimensions      :      2.489 in ID x 2.875 in OD
Radius      :      10-1/2 in
Suitable For Use With      :      Rigid Conduit
Type      :      Standard Radius
Trade Size      :      2-1/2 in
Angle      :      45 deg
Material      :      Steel
Finish      :      Hot Dipped Galvanized
  • Made and melted in the United States
  • RMC recognized as equipment grounding conductor by the NEC
  • No flexibility
  • Standard radius
  • Permitted under all atmospheric conditions and occupancies
  • Shall be permitted to be installed in concrete, in direct contact with the earth
  • Permitted in areas of severe corrosive influences where protected by corrosion protection and judged suitable for the condition
  • Permitted in or under cinder fill where subject to permanent moisture when protected on all sides by a layer of non-cinder concrete not less than 2 in (50 mm) THK or with corrosion protection judged suitable for the condition
  • May be used with aluminum fittings and enclosures