piwik image

Dyna-Flo 6DR500X004D-14G Non Stock
printPrint
  1. pin-int

Dyna-Flo 6DR500X004D-14G

Dyna-Flo 6DR500X004D-14G Explosion Proof Conduit Seal, 1/2 in MNPT

  • MPN: 6DR500X004D-14G
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading loading
Dyna-Flo 6DR500X004D-14G

The Dyna-Flo Feed Through Electrical Connection is designed to stop pressurized liquids and/or gases from passing through electrical wire strands and wire casing should a primary seal fail upstream. Incorporated into the design is a pressure boundary using materials that have exacting tolerances conforming to engineering standards for pressure and temperature containing devices. Built to reduce installation time and costs the Dyna-Flo Feed Through Electrical Connection is without a doubt more efficient then existing larger and lower pressure assemblies from other manufacturers. Dyna-Flo is also mindful of delivery time constraints for projects; we can manufacture and deliver in an expeditious manner. A comprehensive Quality Analysis of components is completed through to the final assembly. Each secondary seal is pressure tested to 1.5 times the working pressure (2350 psi). Di-electric and Resistance tests are also performed on the Feed Through Electrical Connections to ensure conformance to CSA standards and the Canadian Electrical code section 18 requirements within 18-108 and 18-158.

Dyna-Flo Explosion Proof Conduit Seal, 1/2 in MNPT

Size      :      1/2 in MNPT
  • Each fitting is tested at 1.5 times working pressure as a gas and liquid tight, explosive proof fitting
  • Di-electric and resistance tested
  • 2 or 4-Wire design (22 to 14 ga wire)
  • Wire leads are 2 x 2 ft standard
  • Serial number traceable
  • 24 VDC to 120 VAC
  • Wire grade is rated to a 600 V safety factor
  • pdfSpecification Sheet https://www.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Dyna_Flo_6DR500X004D_14G_Specification_Sheet.pdf