piwik image

Non Stock
printPrint
  1. pin-int

Autotech Controls PS127-A10

PS127-A10 Zero Speed Switch Voltage Sensor, 20 to 400 mv RMS

  • MPN: PS127-A10
  • UPC: 999999035417
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading loading
Autotech Controls PS127-A10

The PS127A is a unique voltage sensing device since even though the sensitivity is in milivolt range, the sensing terminals will accept up to 600 V overvoltage. This feature lends the PS127A to be used as a zero speed switch monitoring the back EMF generated by coasting motor.

Autotech Controls Zero Speed Switch Voltage Sensor, 20 to 400 mv RMS Sensing, 115 VAC, 10 A, 2 W Wattage, 50/60 Hz Frequency, LED/Audible Alarm Light Source, -10 to 135 deg F Operating

Amperage Rating      :      10 A
Frequency Rating      :      50/60 Hz
Light Source      :      LED/Audible Alarm
Operating Temperature      :      -10 to 135 deg F
Voltage Rating      :      115 VAC
Wattage      :      2 W
Sensing Range      :      20 to 400 mv RMS
  • Takes the space of only one A-B track mount relay
  • Visual LED indicator
  • Two form C contacts
  • Differential - approximately 5% of set point
  • Calibration - +/-10% of 400 mv RMS at fully CW position of pot
  • Signal impedance - 400 k-Ohm minimum
  • +/-1% repeatability
  • +/-10% over the full input power voltage and temperature range accuracy
  • pdfSpecification Sheet https://www.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Autotech_Controls_PS127_A10_Specification_Sheet.pdf