piwik image

Vortec 7570 Non Stock
printPrint
  1. pin-int

Vortec 7570

Vortec HazLoc 7570 2-Stage A/C Cooler With Mechanical Thermostat, 70 scfm, 5000 Btu/hr

  • MPN: 7570
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading loading
Vortec 7570

Hazardous Location (HazLoc) Duty Vortex A/C Coolers are designed specifically for purged* Electrical enclosures in Class I Div 2, Groups A,B,C and D locations, Class II Div 2, Groups F&G and Class III locations. The HazLoc Vortex A/C incorporates the most up-to-date features into Vortec's line of highly reliable, cost effective enclosure coolers. The HazLoc Vortex A/C is available in 4 different cooling capacities. All of Vortec's Enclosure Coolers keep Electrical and Electronic Enclosures cool, clean and protected and are a low cost alternative to expensive, high maintenance air conditioners; and avoid contamination with dirty, humid air caused by fans. Today's small, compact multi-function electronic controls, variable speed drives, servos and programmable logic controllers are extremely sensitive to heat and contamination. Smaller cabinet sizes make temperature control difficult and prone to premature failures. Excessive heat will cause digital displays to misread, controls to drift, and breakers to trip below rated loads. The result is productivity lost due to machine or line shutdowns. HazLoc Vortex A/Cs maintain a slight pressurization on the cabinet to keep electrical and electronic components clean and dry; and most are thermostatically controlled to maintain enclosure temperatures within a specified temperature range.

Vortec A/C Cooler, 2-Stage, Series: HazLoc, 1465 W, 5000 Btu/hr Capacity range, 70 scfm, Up to 175 deg F, Top/Side/Front Mount

Mounting Type      :      Top/Side/Front
Power Rating      :      1465 W
Series      :      HazLoc
Temperature Rating      :      Up to 175 deg F
Type      :      2-Stage
Flow Rate      :      70 scfm
Capacity Range      :      5000 Btu/hr
  • Sleek, modern design
  • Noise reduction of 78%, when compared to other vortex enclosure coolers
  • Energy use reduction through its integral mechanical thermostat
  • Quick and easy installation in about 5 min
  • Flexible installation - top, side or front (door) mount
  • Incorporates check valve to prevent loss of enclosure pressure when cooling is not required
  • T4 temperature class rating
  • No wiring required to install
  • Thermostatically controlled to maintain enclosure temperatures within ideal range
  • Highly reliable, with full 10 years warranty
  • No ambient, dirty or humid air enters the cabinet
  • Can be used on all cabinets, even in tight spaces
  • Operates in environments up to 175 deg F
  • Significantly lower cost, compared to explosion proof Freon air conditioners
  • Reduce operating cost with mechanical thermostat turning the unit on only when necessary
  • Very quiet, 62 dBA operation, 78% quieter than typical vortex coolers
  • Multiple cooling capacities available, to optimize performance and operating cost
  • Little maintenance required, as compared to Freon A/C and fans
  • Use no refrigerants
  • Small footprint to fit on all enclosures and in confined areas
  • pdfSpecification Sheet https://www.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Vortec_7570_Specification_Sheet.pdf