piwik image

Simplex® by Tyco 4098-9714 Non Stock
printPrint
  1. pin-int

Simplex® by Tyco 4098-9714

Simplex® by Tyco 4098-9714 TrueAlarm 4-Wire Photoelectric Smoke Sensor With LED Status Indicator

  • MPN: 4098-9714
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading loading
Simplex® by Tyco 4098-9714

TrueAlarm photoelectric sensors use a stable, pulsed infrared LED light source and a silicon photodiode receiver to provide consistent and accurate low power smoke sensing. Seven levels of sensitivity are available for each individual sensor, ranging from 0.2% to 3.7% per foot of smoke obscuration. Sensitivities of 0.2%, 0.5%, and 1% are for special applications in clean areas. Standard sensitivities are 1.5%, 2%, 2.5%, 3% and 3.7%. Application type and sensitivity are selected and then monitored at the fire alarm control panel.

Simplex® by Tyco Photoelectric Smoke Sensor, 4-Wire, Series: TrueAlarm, 24 VDC, 13 mA, 2-1/8 in H x 4-7/8 in W Size, -9 to 50 deg C Operating, Surface Mounting

Amperage Rating      :      13 mA
Mounting Type      :      Surface
Operating Temperature      :      -9 to 50 deg C
Series      :      TrueAlarm
Size      :      2-1/8 in H x 4-7/8 in W
Type      :      4-Wire
Voltage Rating      :      24 VDC
  • The sensor head design provides 360 deg smoke entry for optimum response to smoke from any direction
  • Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow
  • Compatible with 4098-9792, 4098-9789, 4098-9791, and 4098-9780 bases
  • pdfSpecification Sheet https://www.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Simplex_by_Tyco_4098_9714_Datasheet.pdf