HPS Fusion™ FS100KHR Non Stock
printPrint
  1. pin-int

HPS Fusion™ FS100KHR

HPS Fusion™ FS100KHR Dry Type Enclosed General Purpose Control Transformer, 380/347 VAC Primary, 12 x 24 VAC Secondary, 100 VA Power Rating, 50/60 Hz, 1 ph Phase

  • MPN: FS100KHR
  • UPC: 803423107840
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading loading
HPS Fusion™ FS100KHR

The HPS Fusion™ line of enclosed transformers are an indoor, cost effective approach ideally suited for 1-phase, general purpose industrial and light duty loads. Designed specifically for applications such as: general purpose enclosed applications used to adjust a supply voltage to match a load requirement, supplying motor control circuits, signal and alarm systems, industrial lighting and circuit isolation and HVAC applications. The HPS Fusion general purpose transformer is enclosed in a Type 1 enclosure allowing for easy mounting and installation via four mounting slots and two keyhole slots. Easy access to primary and secondary wiring compartment through removable covers, which are molded terminal blocks on units upto 3000 VA and coil face terminations on units over 3000 VA.

HPS Fusion™ Control Transformer, Dry Type Enclosed General Purpose, 380/347 VAC Primary, 12 x 24 VAC Secondary, 100 VA, 50/60 Hz, 1 ph, 8.33/4.17 A Maximum, Coil Face/Terminal Block, Panel Mount, 130 deg C, FS-N1 Indoor, 30 to 40 deg C, 3.09 in L x 6.3 in W x 3.6 in H

Connection Type      :      Coil Face/Terminal Block
Dimensions      :      3.09 in L x 6.3 in W x 3.6 in H
Enclosure Type      :      FS-N1 Indoor
Insulation      :      130 deg C
Maximum Amperage Rating      :      8.33/4.17 A
Mounting Type      :      Panel
Temperature Rating      :      30 to 40 deg C
Type      :      Dry Type Enclosed General Purpose
Primary Voltage      :      380/347 VAC
Secondary Voltage      :      12 x 24 VAC
Power Rating      :      100 VA
Frequency Rating      :      50/60 Hz
Phase      :      1 ph
  • All terminal blocks utilize a combination slot/Phillips® #6 screw with a SEMS washer
  • Coil face terminations utilize a 1/4-20 UNC x 1/2 in combination slot/Phillips® screw and a spring lock washer
  • 10 standard voltage groups
  • Primary and secondary ground screws
  • Four wiring and accessory knockouts
  • An indoor enclosed control transformer for easy surface mounting