ProSoft Technology supplies cables that provide the lowest attenuation and are pre-cut and assembled with connectors at the factory to ensure ultimate reliability and customer satisfaction. LMR® 195 Cables are ideal for jumper assemblies in wireless communication systems and short antenna feed runs.
LMR® Extension Cable, Type LMR® 195, 1000 VDC, Aluminum Conductor, Polyethylene Jacket, Black Jacket, -40 to 85 deg C
| Jacket Color |
: |
Black |
| Jacket Material |
: |
Polyethylene |
| Temperature Rating |
: |
-40 to 85 deg C |
| Type |
: |
Type LMR® 195 |
| Voltage Rating |
: |
1000 VDC |
| Conductor Type |
: |
Aluminum |
- With a 1/2 in minimum bend radius, the LMR® 195 cable is substantially more flexible than RG142 and very comparable to RG58
- LMR® 195 boasts lower loss than other RG58/RG142 type cables
- Achieved through the use of high velocity gas-injected closed cell foam dielectric, and bonded aluminium tape outer conductor
- The UV protected black polyethylene jacket makes the cable rugged and resistant to the full range of outdoor environments
- The bonded aluminium tape outer conductor is overlapped to provide 100% coverage, resulting in 0.90 dB RF shielding
- The intimately bonded structure and foam dielectric of LMR® cables provide excellent phase stability over temperature and with bending
- The high velocity dielectric results in superior phase stability as compared with RG58 and RG142 solid dielectric cables
- Industrial data communications experts who understand your protocols, devices, and applications
- 29.9 dB/100 ft attenuation at 5800 MHz, 18.8 dB/100 ft attenuation at 2450 MHz, 11.2 dB/100 ft attenuation at 915 MHz
- -70 to 85 deg C storage temperature range, -40 to 85 deg C installation temperature range
- LMR® 195 extension cable with reverse polarity, right angle RP SMA male type connector on radio side and reverse polarity, SMA bulkhead connector on antenna side
- Use to remotely mount antennas with RP female connectors
Print