The EEL LED Garage Lighter is a good choice for covered walkways, canopies or parking garages. The Garage Lighter combines a durable diecast aluminum housing, polycabonate refractor with the efficacy of LED.
EEL Garage Lighter, Series: VAP, 120/277 VAC, 350 mA, LED Lamp, 42 W Lamp, 50000 hr Average Life, 4000 K Color Temperature, 80 CRI, Clear Shade, Polycarbonate Refractor Lens, 4410 Lumens Lumens, Ceiling/Suspended Mounting, Die Cast Aluminum Housing Material, Bronze Housing Finish, 12.4 in H x 12.4 in W x 9.6 in D Dimensions
Amperage Rating |
: |
350 mA |
Average Life |
: |
50000 hr |
Color Rendering Index (CRI) |
: |
80 |
Color Temperature |
: |
4000 K |
Dimensions |
: |
12.4 in H x 12.4 in W x 9.6 in D |
Housing Material |
: |
Die Cast Aluminum |
Lamp Wattage |
: |
42 W |
Lens Type |
: |
Polycarbonate Refractor |
Lumens |
: |
4410 Lumens |
Mounting Type |
: |
Ceiling/Suspended |
Series |
: |
VAP |
Shade Type |
: |
Clear |
Lamp Type |
: |
LED |
Voltage Rating |
: |
120/277 VAC |
Housing Finish |
: |
Bronze |
- Molex® connectors - easy to install
- Drivers and modules powered by ultrasave
- UV-stabilized, injection molded, impact resistant, frosted polycarbonate housing with continuous poured in place, closed cell gasket
- 20 ga steel channel and channel cover
- Aluminum sheet metal board plate for thermal conduction and support
- Fixture design allows for uplight
- UV-stabilized, injection molded, impact resistant, clear transparent, polycarbonate lens with aesthetic rib detail (0.080 in thick
- Asymmetric (ASY) optical control film provides broad light distribution
- Symmetric (SYM) optical control film is well suited for general lighting environments
- Clear transparent, tamper-resistant, polycarbonate latches standard (8 Torx T-20 tamper-resistant screws included), stainless steel latches also available
- Utilizes high efficiency LEDs mounted to core circuit boards
- 4100 Kelvin temperature standard, with additional color temperatures also available
- High efficiency driver operates 100 VAC through 277 VAC, 50 to 60 Hz
- Integral surge protection standard and tested in accordance with IEEE/ANSI C62.41.2 to category C Low. L/SP (less surge protection) option available for applications where surge protection is not required
- Includes a temperature-sensing component that will limit the temperature of the LEDs in case of excessive ambient temperatures or mis-application
- One driver used for 39 W and 59 W two drivers used for 79 W and 114 W
- Bi-level control and low (0 to 10) voltage dimming standard (see options for prewiring), L93 at 60000 hr (350 mA) and L85 at 60000 hr (525 mA)