NorthStar™ Signal Splitter, For Use With: Encoder, PVC Coated, 5.03 in H x 3.1 in W x 1.9 in D
Dimensions |
: |
5.03 in H x 3.1 in W x 1.9 in D |
Suitable For Use With |
: |
Encoder |
Material |
: |
PVC Coated |
- Encoder signal splitter eliminates the expense and maintenance of two separate encoders
- Optically isolated outputs can be sent to a motor drive and a display at the same time
- Combats long distance and electrical noise and interference problems
- Encoder splitter board mounts to standard DIN rail EN50022
- Input signal - two or three channel quadrature signal, square wave, open collector, differential, or single ended line driver
- Output signal - two independent, isolated line driver output sets
- Output protection - ESD to MIL-STD-883 and short-circuit protected
- 4 to 26 VDC input voltage
- 2.2 mA minimum, 3.5 mA typical input signal current
- Optically isolated, 1 kOhm at 4 V, 6.8 kOhm at 24 V typical
- 0 to 120 kHz frequency range
- 5 to 26 VDC supply voltage
- 150 mA output current
- 26 to 16 AWG wire gauge accepted
- DIN rail EN50022 mounting
- 0 to 50 deg C operating temperature
- 98% non-condensing operational humidity