piwik image

Non Stock
printPrint
  1. pin-int

Marcus MS5A2

MS5A2 Dry Type Isolation Transformer, 600 VAC Primary, 120/240 VAC Secondary, 5000 VA Power Rating, 60 Hz, 1 Ph Phase

  • MPN: MS5A2
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading loading
Marcus MS5A2

Distribution transformers are so named because they distribute low voltage power (5KV and below) to the customers who use electricity at the end of the supply grid. "Dry type" simply means it is cooled by normal air ventilation. The dry type transformer does not require a liquid such as oil or silicone or any other liquid to cool the electrical core and coils The transformer case is ventilated to allow air to flow and cool the coils ). Because they are "dry-type" they contain no dangerous fluids and require no special fire proof vaults or venting of toxic gases. These safety features allow dry type transformers to be installed inside buildings and in locations close to the consumer, which improves overall transformer efficiency. Marcus dry type transformers are safe, highly efficient and trouble free. They require minimum maintenance to provide many years of reliable trouble free service. Supplied as either single or three-phase, Marcus dry type distribution transformers are easy to install and offer unique advantages over competitive brands. They are compact to save scarce floor or wall space and are all supplied with wall or floor brackets and channels. Furthermore, to facilitate trouble free connecting of line and load cables, voltages are clearly indicated on separate terminal boards. All Marcus distribution transformers are manufactured with class 220deg insulation materials and are designed to operate safely below maximum levels. Some of the terms which refer to this same type of transformer are "isolating type", "double-wound transformer", "lighting transformer"," two coil transformer", "step-up" and "step-down" transformer.

Marcus Isolation Transformer, Dry Type, Series: MS Series, 600 VAC Primary, 120/240 VAC Secondary, 5000 VA Power, 60 Hz Frequency, 1 ph, 1 Tap, Lead Connection, Wall Mounting, 220 deg C Insulation, NEMA 1 Enclosure, 150 deg C, 94.3 % Efficiency, Cast Resin Housing Material, 11 in H x 12 in W x 11 in D Dimensions

Connection Type      :      Lead
Dimensions      :      11 in H x 12 in W x 11 in D
Efficiency      :      94.3 %
Enclosure Type      :      NEMA 1
Housing Material      :      Cast Resin
Insulation      :      220 deg C
Mounting Type      :      Wall
Number of Taps      :      1
Series      :      MS Series
Temperature Rating      :      150 deg C
Type      :      Dry Type
Primary Voltage      :      600 VAC
Secondary Voltage      :      120/240 VAC
Power Rating      :      5000 VA
Frequency Rating      :      60 Hz
Phase      :      1
  • Does not require fireproof vaults or special installations
  • Lightweight with no liquids to inspect
  • May be installed close to the load to reduce wiring runs
  • Used to change supply voltages to voltages required by lighting and various types of equipment
  • Commonly used for inductive and resistive loads such as motors and heating
  • For installation in indoor locations with a clean, dust free and chemical - free air circulation
  • Provides a degree of protection against incidental contact by non-authorized personnel
  • Anti-vibration pads installed between the core/coil and the enclosure
  • Ground lug provided
  • Leads brought-up and solidly positioned into separate terminal boards
  • Ventilated painted ASA61 Gray
  • Copper ground strap between core/coil and enclosure
  • Less than 45 dB noise level
  • Copper winding